| Thu, 12 Jul 2018 10:27:08 +0200 |
Alexandre Becoulet |
libdevice: added the auto flag to some bytecode tokensdefault tip |
| Thu, 12 Jul 2018 10:25:57 +0200 |
Alexandre Becoulet |
driver/sx1276: fixed bytecode warning |
| Thu, 12 Jul 2018 10:24:24 +0200 |
Alexandre Becoulet |
driver/sx1276: support auto bw, fixed single/double side bw computation, add frequency error feature, improved AFC |
| Thu, 12 Jul 2018 10:22:49 +0200 |
Alexandre Becoulet |
driver/si446x: support ASK auto bw, FSK manual bw and frequency error feature |
| Thu, 12 Jul 2018 10:20:37 +0200 |
Alexandre Becoulet |
device/rfpacket: allow auto rx bandwidth and freq error adjustment |
| Wed, 11 Jul 2018 19:10:49 +0200 |
Alexandre Becoulet |
libdevice/irq: fix unlink of more than one ep at once |
| Wed, 11 Jul 2018 17:29:48 +0200 |
Jeremie Brunel |
sx1276: fix SW value |
| Mon, 09 Jul 2018 18:40:49 +0200 |
Alexandre Becoulet |
shell: added the auto config flag on shell buffers |
| Mon, 09 Jul 2018 18:33:59 +0200 |
Alexandre Becoulet |
efm32: enable the hwrand driver |
| Mon, 09 Jul 2018 18:32:56 +0200 |
Alexandre Becoulet |
minor fixes |
| Mon, 09 Jul 2018 18:18:11 +0200 |
Alexandre Becoulet |
efm32: properly report reset cause on EFM family |
| Mon, 09 Jul 2018 18:13:13 +0200 |
Alexandre Becoulet |
efm32: added RMU and EMU device headers |
| Mon, 09 Jul 2018 17:04:20 +0200 |
Alexandre Becoulet |
drivers/si446x: renamed CONFIG_DRIVER_RFPACKET_SLEEP/CONFIG_DRIVER_RFPACKET_SI446X_SLEEP |
| Mon, 09 Jul 2018 17:01:57 +0200 |
Alexandre Becoulet |
driver/si446x: minor fixes |
| Mon, 09 Jul 2018 17:01:22 +0200 |
Alexandre Becoulet |
driver/si446x: report AFC freq offset |
| Mon, 09 Jul 2018 16:58:18 +0200 |
Alexandre Becoulet |
driver/si446x: allow use of a TCXO |
| Mon, 09 Jul 2018 18:13:50 +0200 |
Alexandre Becoulet |
driver/si446x: do not match chip part number on init |
| Fri, 06 Jul 2018 14:53:36 +0200 |
Jeremie Brunel |
driver/si446x: add blob ressources to tune configuration |
| Mon, 02 Jul 2018 17:44:09 +0200 |
Sebastien Cerdan |
Usb CDC-ACM driver: Change zlp policy sending |
| Mon, 02 Jul 2018 15:02:35 +0200 |
Jeremie Brunel |
rfpacket: add crc seed into packet configuration |
| Fri, 29 Jun 2018 20:57:34 +0200 |
Sebastien Cerdan |
usbcdc_acm.c: Send zero length packet when request size = mps |
| Tue, 26 Jun 2018 13:10:03 +0200 |
Alexandre Becoulet |
efm32: removed wrong %end |
| Thu, 21 Jun 2018 22:56:06 +0200 |
Sebastien Cerdan |
efr32 radio: Add missing rx flag |
| Tue, 19 Jun 2018 11:04:33 +0200 |
Alexandre Becoulet |
libgfx/example: added missing deps in unix makefile |
| Tue, 19 Jun 2018 11:02:55 +0200 |
Alexandre Becoulet |
shell/crypto: allow random with 0 sized state |
| Tue, 19 Jun 2018 11:00:47 +0200 |
Alexandre Becoulet |
arch/efm32: enable LFRCO when CONFIG_DEVICE_CLOCK is not used |
| Tue, 19 Jun 2018 11:02:19 +0200 |
Jeremie Brunel |
libdevice: add SHELL_MEM token |
| Tue, 19 Jun 2018 10:52:50 +0200 |
Jeremie Brunel |
libdevice: fix shell mem token in Makefile |
| Mon, 18 Jun 2018 15:22:39 +0200 |
Alexandre Becoulet |
printk/ring: added missing config provide |
| Mon, 18 Jun 2018 09:13:23 +0200 |
Alexandre Becoulet |
efm32: added an hardware random seed driver |
| Mon, 11 Jun 2018 17:31:58 +0200 |
Alexandre Becoulet |
config.pl: fixed use of %end to terminate %section |
| Wed, 13 Jun 2018 10:32:32 +0200 |
Pierre Bertin |
libgfx: fix variable name generating compile error |
| Mon, 11 Jun 2018 14:40:22 +0200 |
Pierre Bertin |
scripts: blob2c: add option to define C headers according to -n option |
| Fri, 08 Jun 2018 20:52:58 +0200 |
Sebastien Cerdan |
EFM32 dma: Fix dma get_status |
| Fri, 08 Jun 2018 14:14:25 +0200 |
Alexandre Becoulet |
shell/timer: fixed pointer size + removed busy wait |
| Fri, 08 Jun 2018 11:20:18 +0200 |
Alexandre Becoulet |
efm32: rtc driver uses EFM32_RTC_ADDR instead of pv->addr |
| Thu, 07 Jun 2018 23:58:02 +0200 |
Sebastien Cerdan |
EFM32 family: Add UART driver with DMA |
| Wed, 06 Jun 2018 23:02:39 +0200 |
Sebastien Cerdan |
ezr32 wstk6202a: Change usart2 address |
| Wed, 06 Jun 2018 21:35:12 +0200 |
Alexandre Becoulet |
shell: added simple flash shell commands in the 'mem' group |
| Wed, 06 Jun 2018 21:33:40 +0200 |
Alexandre Becoulet |
usb/cdc-acm: allow char requests of size 0 |
| Wed, 06 Jun 2018 21:33:00 +0200 |
Alexandre Becoulet |
device/irq: use sink_update to disable irq on unlink, fix device refcount on icu |
| Wed, 06 Jun 2018 21:29:54 +0200 |
Alexandre Becoulet |
libgfx: added vm address translation function |
| Wed, 06 Jun 2018 21:29:06 +0200 |
Alexandre Becoulet |
efm32/recmu: use RC calibration values from the Device Info page |
| Wed, 06 Jun 2018 17:34:37 +0200 |
Alexandre Becoulet |
change logk level when BUILD=debug |
| Mon, 04 Jun 2018 10:19:45 +0200 |
Jeremie Brunel |
bytecode: minor fix (variable not defined in debug mode) |
| Thu, 31 May 2018 22:51:43 +0200 |
Alexandre Becoulet |
libdevice/timer: updated dev_timer_get_sec |
| Wed, 30 May 2018 11:16:15 +0200 |
Alexandre Becoulet |
rfpacket: rq->mask field rename |
| Sun, 27 May 2018 18:45:35 +0200 |
Alexandre Becoulet |
added libgfx |
| Thu, 24 May 2018 12:45:35 +0200 |
Alexandre Becoulet |
efm32/usart: support non-blocking access |
| Tue, 22 May 2018 13:14:07 +0200 |
glihm |
merge |
| Thu, 17 May 2018 20:18:41 +0200 |
glihm |
libble: compile with libpersist, null ptr err to be solved |
| Thu, 17 May 2018 20:18:12 +0200 |
glihm |
examples: ble: build adjust to libpersist |
| Thu, 17 May 2018 20:17:31 +0200 |
glihm |
examples: ble: beacon: adjust to libpersist |
| Thu, 17 May 2018 19:32:44 +0200 |
glihm |
libble: adapt SM to new libpersist |
| Thu, 17 May 2018 19:24:05 +0200 |
glihm |
libpersist: add assert to ensure dev_size and page_size correctness |
| Thu, 17 May 2018 19:13:46 +0200 |
glihm |
libpersist: add the LOGK_MODULE_ID |
| Tue, 22 May 2018 13:12:39 +0200 |
glihm |
nrf5x: remove NFCPINS setting when NFCT not compiled |
| Tue, 17 Apr 2018 16:02:59 +0200 |
glihm |
default merged into nfc20182018-nfc |
| Fri, 18 May 2018 13:44:37 +0200 |
Alexandre Becoulet |
more logk stuff |
| Fri, 18 May 2018 13:37:17 +0200 |
Alexandre Becoulet |
mutek/startup: added mutekh_startup_devready |
